Fish Knife Recipes

A practical guide to fish knife recipes: how to handle knife fish, cut clean fillets, choose cooking methods, and plan a seafood menu around it.

8 min read8 viewsFish Knife Recipes
— · 0 votes
Contents
  1. What knife fish is and how it eats
  2. Setting up a knife fish fillet station
  3. How to fillet a knife fish step by step
  4. Pan-frying knife fish fillets
  5. Steaming and poaching for delicate flesh
  6. Knife fish in curries, stews and soup
  7. Freezing, storing and planning the menu
  8. Questions About Cooking Knife Fish
  9. What is a knife fish, and is it the same as a knifefish used in aquariums?
  10. Do knife fish have many bones?
  11. Can I substitute another fish in a knife fish recipe?
  12. What is the best way to keep knife fish fillets from falling apart?
  13. Can I freeze raw knife fish fillets?

Fish knife recipes start with knowing the fish: knife fish is a long, slender freshwater fish with soft, fine-grained flesh and very few bones. The knife in the name is the fish, not the tool, so the recipes here cover both how to break it down and how to cook it. Clean fillets take gentle heat well, and the mild flesh suits steaming, pan-frying, curries and soup.

  • Knife fish is named for its long, blade-like body, so a thin flexible fillet knife is the right tool for it.
  • Its soft flesh and minimal bones make it easy to fillet, but the skin is delicate and tears under a heavy blade.
  • Short, gentle cooking keeps knife fish fillets intact; long boiling breaks them apart.
  • Mild flesh takes strong seasonings well, which makes knife fish useful in curries and stews.
  • Fillets freeze well when wrapped tight, so one knife fish can supply more than one meal.

What knife fish is and how it eats

Knife fish is a freshwater fish with an elongated, flattened body that tapers toward the tail, resembling the blade of a knife. The flesh is pale, soft and finely grained, with a mild flavor that absorbs seasoning rather than fighting it. A whole knife fish yields long fillets rather than thick steaks, so portion sizes run smaller than with round fish.

The bone structure is simple compared with many fish, because a central line of small bones runs along the fillet. Fillets therefore come away cleanly, and pin bones are few enough to remove by hand. Soft flesh means the fillet bends easily, which helps when you lift it from board to pan.

Knife fish suits dishes where the flesh is broken or folded rather than carved at the table. Curries, soups and steamed parcels treat the fillet gently and keep it whole. A seafood menu built around it should pair it with firmer fish so textures vary across the table.

Setting up a knife fish fillet station

A clean work station decides how well a knife fish fillet turns out, because soft flesh picks up every slip of the blade. Set a sturdy cutting board with a damp cloth underneath so it cannot slide. Keep a bowl of cold water nearby to rinse the board between fish.

Use a thin, flexible fillet knife with a narrow blade and a sharp edge. A flexible blade follows the curve of the backbone and stays close to the bone without gouging the flesh. A heavy chef knife crushes the delicate flesh instead of slicing it.

Chill the fish well before cutting, since cold flesh holds its shape better under the blade. Work with one fillet at a time and move each finished piece to a tray in the refrigerator. Wash hands, board and knife with hot soapy water after handling raw fish, and keep raw and cooked seafood apart.

  • Thin flexible fillet knife, sharpened before use
  • Sturdy board with a damp cloth beneath it
  • Bowl of cold water for rinsing the board
  • Tray lined with paper for finished fillets
  • Clean cloth for gripping the tail

How to fillet a knife fish step by step

Filleting a knife fish begins with a cut behind the head, angled down to the backbone. Turn the blade flat and run it along the spine toward the tail with long, even strokes. Let the blade follow the bone rather than forcing a straight line through the flesh.

Lift the freed fillet away as you cut so you can see the line of bones. When the blade reaches the tail, cut the fillet free and lay it skin side down. Repeat on the second side, then run a fingertip along the fillet to find any pin bones and pull them out with tweezers.

Rinse the fillets briefly in cold water and pat them dry, since wet flesh will not brown in the pan. Trim any dark or ragged edges so the fillets cook evenly. A job that needs speed and a very sharp edge on many fish is work for a trained fishmonger, so ask for fillets if you are unsure.

StepWhat to doWhy it matters
1Cut behind the head to the backboneGives a starting point on the spine
2Run a flexible blade along the spine to the tailKeeps the fillet whole and off the bone
3Lift the fillet away as you cutShows the bone line clearly
4Pull pin bones with tweezersLeaves a clean, soft fillet
5Rinse and pat dryDry flesh browns instead of steaming

Pan-frying knife fish fillets

Pan-frying suits knife fish when the fillets are dry, seasoned and cooked fast over medium heat. Soft flesh firms quickly, so the fillet needs only a short stay in the pan on each side. Overcooking turns the fine grain mushy and the edges fragile.

Dust the fillets lightly in flour or cornstarch to give the surface a dry layer that protects the flesh. Heat a little oil until it shimmers, then lay the fillets in the pan away from you. Turn once with a thin spatula rather than tongs, which can tear the soft center.

Season with salt, pepper, garlic or a squeeze of citrus after cooking rather than before, since salt draws water to the surface. Serve pan-fried knife fish with rice, greens or a light sauce that will not drown the mild flavor. The same method works for a quick seafood menu on a weeknight.

Steaming and poaching for delicate flesh

Steaming keeps knife fish fillets whole and moist, because gentle vapor surrounds the flesh without knocking it about. Season the fillets with ginger, scallion or a little soy, then set them on a plate above simmering water. Cover and cook until the flesh turns opaque and flakes at the thickest point.

Poaching works in a similar way with a shallow bath of seasoned stock or coconut milk kept below a boil. A gentle simmer holds the fillet together, while a hard boil shreds it. Lift the fish out with a slotted spoon and reduce the poaching liquid into a sauce.

Both methods protect knife fish from the dry heat that dries out soft fillets. Keep the cooking time short and check early, since a thin fillet needs less time than a thick one. Steamed or poached fillets fit a light seafood menu alongside crisp vegetables.

Knife fish in curries, stews and soup

Knife fish holds up in curry when the fillets are added near the end of cooking instead of at the start. Simmer the sauce first until the flavors blend, then slide in the fillets and cook them gently until just set. Stir as little as possible so the soft pieces stay intact.

A coconut-based curry, a tomato stew or a clear broth all carry the mild flesh well. Strong aromatics such as chili, turmeric, lemongrass and ginger give the fish something to absorb. Cut the fillets into large pieces for stews, since small cubes break down.

Soup benefits from knife fish because the flesh thickens the broth slightly as it cooks. Add the fish last and let the pot sit off the heat for a moment before serving. A seafood menu with a knife fish soup, a firm grilled fish and a rice dish gives the table variety.

Freezing, storing and planning the menu

Fresh knife fish fillets keep best on ice in the refrigerator and should be cooked soon after cutting. Wrap fillets tightly for freezing, pressing out air, and label the package with the date. Thaw them in the refrigerator overnight rather than at room temperature.

Soft flesh suffers if refrozen, so divide the fish into meal-sized portions before freezing. Once thawed, pat the fillets dry and cook them the same day. Frozen and thawed knife fish suits curries and soups better than dry pan-frying.

Plan a seafood menu around texture and cooking method rather than putting every fish in one dish. Pair knife fish with a firm fish for grilling, a shellfish dish and a vegetable side. One whole knife fish, filleted, can carry a starter and part of a main course.

Questions About Cooking Knife Fish

What is a knife fish, and is it the same as a knifefish used in aquariums?

Knife fish is a long, narrow freshwater fish with soft, mild flesh and few bones, sold as food in some markets. The name also covers aquarium species that are not eaten, so check what the counter is selling. For cooking, look for pale fillets with a clean, fresh smell.

Do knife fish have many bones?

Knife fish have a simple bone line along the center of each fillet and few pin bones. The fillets come away cleanly with a flexible knife, and any remaining pin bones pull out with tweezers. Fewer bones make knife fish easier to serve to guests than many round fish.

Can I substitute another fish in a knife fish recipe?

Any soft-fleshed white fish can stand in for knife fish in steaming, poaching and curry recipes. Choose a fillet of similar thickness so the cooking time stays close. Firmer fish such as cod or halibut need slightly longer cooking.

What is the best way to keep knife fish fillets from falling apart?

Handle knife fish fillets gently, dry them well and cook them briefly over moderate heat. A light dusting of flour or cornstarch helps hold the surface together in the pan. In curries and soups, add the fillets at the end and stir as little as possible.

Can I freeze raw knife fish fillets?

Raw knife fish fillets freeze well when wrapped tightly with the air pressed out. Freeze them in meal-sized portions and thaw overnight in the refrigerator. Use thawed fillets the same day and cook them gently.

Read next

Latest articles