Easy Braised Fish Recipes: From the Seafood Counter to the Table

How to braise fish fillets and steaks: which fish to buy, four easy braised fish recipes, braising liquid flavors, portions, pairings, safe handling and make-ahead tips.

13 min readBraising Seafood11 viewsEasy Braised Fish Recipes: From the Seafood Counter to the Table
— · 0 votes
Contents
  1. What are braised fish dishes?
  2. Which fish works best for easy braised fish recipes?
  3. Fish steaks vs. fish fillets for braising
  4. What to look for at the seafood counter
  5. How do you braise fish? The basic method
  6. Which braised fish recipes are easy for beginners?
  7. Tomato, olive and caper braised cod
  8. Soy-ginger braised fish
  9. Coconut curry braised fish
  10. White wine, leek and butter braised halibut
  11. How do braising liquids change flavor and texture?
  12. How much fish should you buy per person?
  13. How do you build a menu around braised fish?
  14. Weeknight braised fish dinner
  15. Relaxed dinner party or family gathering
  16. Drink pairings for braised fish dishes
  17. What substitutions work in braised fish recipes?
  18. How should you handle fish safely when braising?
  19. Can you make braised fish ahead of time?
  20. How to choose the right braised fish recipe for your occasion

The easiest braised fish recipes follow one pattern. Build a flavorful braising liquid in a wide pan, such as tomato and garlic, soy and ginger, coconut curry, or white wine and butter. Then nestle firm fish fillets or fish steaks into it, cover, and cook at a gentle simmer until the fish just flakes. Fillets about 1 inch (2.5 cm) thick usually need roughly 8–12 minutes. Because the sauce does most of the work, braised fish dishes come together in under 45 minutes, forgive small timing mistakes better than pan-frying, and arrive at the table with their own sauce for rice, bread or potatoes.

What are braised fish dishes?

Braised fish dishes are recipes in which fish is partly submerged in a seasoned liquid and cooked slowly in a covered pan over low heat. Braising differs from poaching, where fish is fully covered by a mild liquid that is usually discarded. In a braise, the liquid comes about one-third to halfway up the fish, and it is concentrated enough to serve as the sauce.

Meat braises often take hours. Fish braises are quick because fish has little connective tissue to break down. The goal is not to tenderize the fish. The goal is to cook it evenly and gently while it absorbs flavor and stays moist. The steam trapped under the lid cooks the top of the fish, and the liquid cooks the bottom.

Which fish works best for easy braised fish recipes?

Firm, thick fish holds together best in braised fish recipes. Look for fish steaks or fillets at least 3/4 inch (about 2 cm) thick. Cod, halibut, salmon, swordfish, monkfish, mahi-mahi and sea bass are reliable choices. Thin, delicate fillets such as sole or flounder can be braised, but they need very short cooking and careful handling.

FishCommon cutTexture after braisingFlavorGood braising liquids
Cod, haddock, pollockThick filletsLarge, tender flakes; can break if stirredMild, cleanTomato, coconut curry, white wine
HalibutFillets or steaksFirm, dense, moistMild, slightly sweetWhite wine and butter, coconut, tomato
SalmonFillets or steaksRich, holds shape wellPronounced, oilySoy-ginger, miso, leeks and cream or butter
Swordfish, tunaSteaksMeaty; dries out if overcookedRobustTomato, olives and capers, peppers
MonkfishTrimmed tail piecesVery firm, almost lobster-likeMild, sweetTomato and saffron, curry, wine
Sea bass, snapperFillets or whole fishTender, moist, delicateMild, sweetSoy-ginger, light tomato, herbs and citrus
Catfish, tilapiaFilletsSoft to medium-firmMildSpiced tomato, coconut curry, soy-based sauces

Fish steaks vs. fish fillets for braising

Fish steaks are cross-section cuts through the backbone, so they often contain a bone. They are thick and uniform and very hard to overcook into mush, which makes them the most forgiving cut for braising. Fish fillets are boneless sides of fish. They are easier to eat and serve, but they taper at the tail end. Fold thin tail ends under, or cut fillets into even portions, so everything cooks at the same rate.

What to look for at the seafood counter

Fresh fish for braising should smell like clean seawater, not sour or strongly fishy. The flesh should look moist and firm, without dry edges, gaps between the flakes or pooled milky liquid. Whole fish should have clear eyes and bright red gills. Frozen fillets are a good, often more affordable option for braising. Choose packages that are well sealed and free of ice crystals inside, and thaw them in the refrigerator before cooking. Ask the fishmonger to skin fillets, remove pin bones or cut even portions. That small request saves real time on a weeknight.

How do you braise fish? The basic method

The basic method for braising fish has two stages. First you build and simmer a sauce. Then you cook the fish in it, covered, over low heat. These steps apply to almost every easy braised fish recipe:

  1. Prepare the fish. Pat fillets or steaks dry and season lightly with salt. Let them sit while you make the sauce. Keep them refrigerated if your kitchen is warm or prep will take long.
  2. Choose the right pan. Use a wide skillet, sauté pan or shallow braiser with a lid. The fish should fit in a single layer without overlapping.
  3. Build the aromatics. Gently cook onion, garlic, ginger, leeks, shallots or spices in oil or butter until soft and fragrant, usually 3–6 minutes.
  4. Add the braising liquid. Add tomatoes, stock, wine, coconut milk, soy-based sauce or water. Simmer for about 5–10 minutes so the flavors blend and the sauce reduces a little. Taste and adjust the seasoning now, before the fish goes in.
  5. Nestle in the fish. Lower the heat so the liquid barely bubbles. Place the fish in the pan and spoon some sauce over the top. The liquid should reach about one-third to halfway up the sides.
  6. Cover and simmer gently. Thin fillets of about 1/2 inch (1 cm) usually need around 4–6 minutes. Fillets or steaks of about 1 inch (2.5 cm) usually need around 8–12 minutes. A gentle simmer means small, occasional bubbles, not a rolling boil, which toughens fish and breaks it apart.
  7. Check doneness. The fish is done when it turns opaque throughout and separates easily with a fork. It should reach 145°F (63°C) in the thickest part.
  8. Finish and serve. Lift the fish out with a wide spatula. Brighten the sauce with lemon or lime juice, fresh herbs or a knob of butter, then spoon it over the fish.

An optional extra step adds flavor. Sear firm fish such as salmon, halibut or swordfish for 1–2 minutes per side before adding it to the sauce. Searing adds browned flavor and helps firm the surface. Skip it for delicate fish, or when speed matters more.

Which braised fish recipes are easy for beginners?

The following four braised fish recipes are easy for beginners. Each uses common ingredients and one pan. Each serves 4 people with four skinless fillets of about 5–6 ounces (140–170 g) each. Cooking times assume fillets about 1 inch (2.5 cm) thick.

Tomato, olive and caper braised cod

This Mediterranean-style braise is bright, briny and especially good for mild white fish.

  1. Warm 2 tablespoons olive oil in a wide pan over medium heat. Cook 1 sliced onion for about 5 minutes, then add 3 sliced garlic cloves and a pinch of chili flakes for 1 minute.
  2. Add one 14–15 ounce (about 400 g) can of diced tomatoes and 1/2 cup (120 ml) dry white wine or fish stock. Simmer for 8–10 minutes.
  3. Stir in a handful of pitted olives and 1 tablespoon capers, then taste for salt.
  4. Nestle in the cod, cover and simmer gently for 8–10 minutes, until the fish flakes.
  5. Finish with chopped parsley and a squeeze of lemon. Serve with crusty bread, couscous or orzo.

Soy-ginger braised fish

This savory-sweet braise is inspired by Chinese red-braised fish. It suits sea bass, snapper, salmon or firm white fillets.

  1. Heat 2 tablespoons neutral oil in a wide pan. Briefly fry 6–8 thin slices of fresh ginger, 2 sliced garlic cloves and the white parts of 3 scallions until fragrant.
  2. Add 3 tablespoons soy sauce, 1 tablespoon Shaoxing wine or dry sherry, 1–2 teaspoons sugar and 3/4 cup (180 ml) water. Bring to a simmer.
  3. Add the fish and spoon the sauce over it. Cover and cook at a gentle simmer for 6–10 minutes, basting once or twice.
  4. Remove the fish. If you want a glossier sauce, reduce it for a minute or two.
  5. Pour the sauce over the fish and scatter with sliced scallion greens. Serve with steamed rice and stir-fried greens.

Coconut curry braised fish

This creamy, fragrant braise is very forgiving, which makes it good for cod, halibut, tilapia or monkfish.

  1. Soften 1 chopped shallot or small onion in 1 tablespoon oil. Add 2–3 tablespoons Thai red or yellow curry paste and stir for 1 minute.
  2. Add one 13.5 ounce (400 ml) can of coconut milk and 1–2 teaspoons fish sauce, or salt to taste. Simmer for 5 minutes.
  3. Add the fish, cover and simmer gently for 6–10 minutes.
  4. Finish with lime juice and fresh cilantro or Thai basil. Serve with jasmine rice.

White wine, leek and butter braised halibut

This mild, elegant braise works well for a dinner party. Salmon is a good substitute for halibut.

  1. Melt 2 tablespoons butter in a wide pan. Gently cook 2 thinly sliced, well-washed leeks with a pinch of salt for 8–10 minutes, until soft but not browned.
  2. Add 1/2 cup (120 ml) dry white wine and 1/2 cup (120 ml) fish or vegetable stock. Simmer for 3–4 minutes.
  3. Add the fish, cover and simmer gently for 8–12 minutes.
  4. Remove the fish. Whisk 1–2 tablespoons cold butter into the sauce off the heat, then add lemon zest and chopped dill or chives.
  5. Serve with boiled new potatoes or a simple rice pilaf.

How do braising liquids change flavor and texture?

The braising liquid sets the character of braised fish. Acidic, tomato-based liquids taste bright and help firm fish hold its shape. Coconut and cream-based liquids are rich and soft, and they cushion delicate fish. Soy-based liquids are salty and savory and lightly glaze the surface.

Braising styleMain liquidFlavor profileBest fishServe with
Mediterranean tomatoTomatoes, wine, olive oilBright, tangy, herbyCod, swordfish, monkfish, snapperBread, orzo, polenta, couscous
Soy-gingerSoy sauce, rice wine, waterSavory, slightly sweet, aromaticSea bass, salmon, snapper, whole fishSteamed rice, bok choy
Coconut curryCoconut milk, curry pasteCreamy, warm, spicedCod, halibut, tilapia, monkfishJasmine rice, flatbread
White wine and butterWine, stock, butterDelicate, rich, elegantHalibut, salmon, sea bassPotatoes, green beans, asparagus
Miso or dashiDashi, miso, mirinUmami, gently sweetSalmon, black cod, mackerelRice, pickles, sautéed greens

Two practical points apply to any style. Very salty liquids, such as soy sauce or miso, concentrate as they reduce, so season cautiously and taste at the end. Highly acidic liquids are best added to fish only for the final cooking, not used as a long pre-soak, because acid begins to firm the surface of fish before heat is applied.

How much fish should you buy per person?

For braised fish served as a main course, a common guideline is about 5–6 ounces (140–170 g) of boneless fillet per person. For bone-in fish steaks, plan on about 6–8 ounces (170–225 g) per person. For whole fish, plan on roughly 3/4 to 1 pound (340–450 g) per person, because the head, bones and fins account for much of the weight. Buy a little more if the fish is the only substantial dish. Buy a little less if you are serving several sides or a rich first course.

Braised fish recipes scale well as long as the fish stays in a single layer. To serve 8 instead of 4, use two pans or a large roasting pan covered tightly with foil, rather than crowding one skillet.

How do you build a menu around braised fish?

Build a braised fish menu by choosing one starch to soak up the sauce, one fresh or green vegetable for contrast, and an optional simple starter or dessert that does not compete for stove space. The sauce is the centerpiece, so the side dishes can stay simple.

Weeknight braised fish dinner

For a weeknight, pair the coconut curry or soy-ginger braise with rice from a rice cooker and quickly sautéed or steamed greens. The whole meal can be ready in about 30–40 minutes, with the rice cooking while you make the sauce.

Relaxed dinner party or family gathering

For guests, the tomato-olive or white wine and leek braise works well. Serve it family-style straight from a wide, attractive braiser. Start with a simple salad or marinated vegetables, serve the fish with crusty bread or potatoes, and finish with fruit or a make-ahead dessert. Because the sauce can be prepared earlier, you only need about 10–15 minutes of active cooking once guests arrive.

Drink pairings for braised fish dishes

  • Tomato-based braises: dry rosé, a crisp white with good acidity, or a light, low-tannin red.
  • White wine and butter braises: the same dry white used in the sauce is a natural match.
  • Soy-ginger or miso braises: an off-dry white such as Riesling, a light lager or green tea.
  • Coconut curry braises: an aromatic off-dry white, a crisp lager, or sparkling water with lime.

What substitutions work in braised fish recipes?

Most braised fish recipes accept substitutions as long as you replace fish with fish of similar thickness and firmness, and replace liquids with liquids of similar strength.

  • Fish swaps: Cod, haddock, pollock and hake are interchangeable. Halibut can be replaced with thick cod or sea bass. Swordfish can be replaced with thick tuna or mahi-mahi steaks. For an economical option, catfish, tilapia and frozen pollock or cod all braise well in strongly flavored sauces.
  • Wine: Replace wine with stock plus a small splash of vinegar or lemon juice for acidity.
  • Shaoxing wine: Dry sherry is a common substitute.
  • Fish stock: Vegetable stock, light chicken stock or diluted clam juice can replace it.
  • Coconut milk: Light coconut milk makes a thinner but still flavorful sauce.
  • Fresh herbs: Use what you have. Parsley, dill, cilantro, basil and chives all suit different styles.

When substituting a thinner fish, reduce the cooking time and start checking for doneness several minutes earlier. When substituting a thicker cut, add a few minutes and check again.

How should you handle fish safely when braising?

Safe handling for braised fish starts with keeping raw fish cold and ends with cooking it to an internal temperature of 145°F (63°C), when the flesh is opaque and flakes easily.

  • Shopping: Buy fish near the end of your shopping trip. If the drive home is long, keep it in an insulated bag with ice packs.
  • Storage: Refrigerate fresh fish promptly at 40°F (4°C) or below, and cook it within a day or two of purchase.
  • Thawing: Thaw frozen fish overnight in the refrigerator. For a faster thaw, place the sealed package in cold water. Do not thaw fish on the counter.
  • Cross-contamination: Use a separate cutting board and wash your hands, knives and surfaces after handling raw fish.
  • Leftovers: Refrigerate cooked braised fish within 2 hours of cooking, and eat it within about 3–4 days.

Can you make braised fish ahead of time?

The best make-ahead approach for braised fish is to prepare the braising liquid in advance and cook the fish just before serving. Fully cooked fish becomes firmer and can fall apart when reheated.

  1. Make the sauce up to 2–3 days ahead, cool it quickly and refrigerate it in a covered container.
  2. Cut and season the fish a few hours before serving and keep it refrigerated.
  3. When you are ready to eat, bring the sauce back to a gentle simmer in a wide pan.
  4. Add the fish, cover and cook as the recipe directs, usually 6–12 minutes depending on thickness.

To reheat leftover braised fish, warm it gently in its sauce in a covered pan over low heat, or in a low oven, until heated through. Avoid boiling. Tomato and curry braises reheat best. Butter-based sauces can separate, and whisking in a spoonful of hot water or stock can help bring them back together.

How to choose the right braised fish recipe for your occasion

Choose an easy braised fish recipe by matching three things: your time, your budget and your guests. For a fast, inexpensive weeknight meal, braise frozen cod, pollock or tilapia in coconut curry or a spiced tomato sauce and serve it with rice. For a relaxed gathering, prepare a tomato-olive or soy-ginger sauce ahead and add the fish once everyone arrives. For a special dinner, splurge on halibut or sea bass in white wine, leeks and butter. Whatever you choose, the formula stays the same: a flavorful liquid, fish in a single layer, a lid and a gentle simmer.

Related articles