# Preparing Seafood for Canning at Home

Learn how to prep fish and shellfish for home canning: cleaning and cutting, raw pack versus hot pack, salting, headspace, and pressure canning safety.

Preparing seafood for canning at home means cleaning and cutting the fish or shellfish, choosing a raw pack or hot pack, filling jars with the right headspace, and processing in a pressure canner. Seafood is a low-acid food, so pressure canning is the only safe method for jars kept at room temperature. 

- Clean and chill seafood fast, and keep the raw fish cold while you work.
- Seafood is low-acid, so a pressure canner does the preserving, not a boiling water bath.
- Raw pack suits firm fish, while hot pack gives a denser jar and drives out air.
- Leave the headspace your canner or jar instructions specify, and remove trapped air bubbles.
- Follow a tested canning procedure for the seafood you have, because fish and shellfish differ.
 

## Why pressure canning is required for seafood 

Seafood belongs to the low-acid food group, and low-acid foods need a pressure canner to be shelf stable. A boiling water bath cannot push the internal temperature of the jar high enough to destroy the bacteria that cause serious illness. 

The pressure canner raises the temperature of the food above the boiling point of water. That heat, held for the correct time, makes the sealed jar safe to store without refrigeration. Skipping this step leaves a real risk of botulism in a low-acid jar. 

Use the processing time and pressure that a tested canning source gives for your specific seafood and jar size. Altitude changes the pressure you need, so check the guidance for your elevation. A pressure canner is different from a pressure cooker, and the two do not substitute for each other. 

## Cleaning and cutting fish for jars 

Cleaning and cutting fish for jars starts with a sharp knife, a clean board and cold running water. Scale, gut and rinse the fish so no blood or viscera reaches the jar. Keep the fish on ice until the moment you pack it. 

Cut the fish into pieces that fit the jar with a little room to spare. Remove the skin and dark fatty tissue if your canning source calls for it, since fat can turn rancid during storage. Firm white fish holds its shape in the jar better than soft, oily fish. 

Bones can stay in small fish if the tested procedure includes them, because pressure canning softens them. Large bones should come out before packing so they do not puncture the fish or crowd the jar. Wipe the jar rim clean before you place the lid, or the seal may fail. 

## Raw pack versus hot pack for fish 

Raw pack and hot pack differ in whether the seafood goes into the jar uncooked or partly cooked. Raw pack places raw pieces straight into the jar, while hot pack precooks the fish briefly and packs it while hot. 

Raw pack keeps the process simple and gives pieces that hold their form, but the fish shrinks in the jar and may float in its own liquid. Hot pack drives out air and lets you fit more fish into each jar, though the pieces are more fragile. 

Choose the pack that your tested canning procedure specifies for the fish you have, because the packing method affects the processing time. Do not mix the two methods in one batch. The table below compares the two approaches at a glance. 
| Feature | Raw pack | Hot pack | 
| Fish state | Raw pieces | Precooked pieces | 
| Jar fill | Loose, shrinks during processing | Denser, less shrinkage | 
| Liquid | Added after packing | Often added hot | 
| Handling | Simple, firm pieces | More steps, fragile pieces |  

## Salting before canning 

Salting before canning adds flavor and helps firm the fish, and it should follow the amount your tested procedure gives. Too much salt makes the jar unpleasant, and salt does not replace pressure canning as a safety step. 

Some procedures call for a dry salt rub, while others add salt directly to the jar or use a brine. A dry rub draws moisture from the surface, so pat the fish dry before packing. Record what you did so the next batch matches. 

Do not add oil, butter or extra liquid beyond what the procedure allows. Added fat can coat the fish and interfere with heat penetration in the jar. Plain water or the fish's own juice is the liquid a tested recipe expects. 

## Filling jars and setting headspace 

Headspace and jar filling decide whether the lid seals and whether the contents process evenly. Pack the seafood to the fill line your canning source states, then add liquid to the same level. Headspace is the empty gap between the food and the lid. 

Run a nonmetal spatula or bubble tool down the inside of the jar to release trapped air. Air pockets slow heat penetration and can push liquid out during processing. Add more liquid if the level drops after removing bubbles. 

Wipe the rim with a clean damp cloth, place the lid, and tighten the band to fingertip tightness. A band turned too hard can prevent the air from escaping as the jar heats. Follow the headspace figure for your jar size rather than guessing. 

## Equipment for home canning seafood 

Home canning equipment for seafood centers on a pressure canner with a accurate gauge and a rack to keep jars off the bottom. Jars, new lids and bands must be clean and free of chips. A jar lifter and a bubble tool make the work safer and steadier. 

Have the canner checked for gauge accuracy if the manufacturer or a local extension service offers it. An inaccurate gauge gives a false sense of safety. Follow the manufacturer's instructions for venting the canner before you build pressure. 

Keep a written log of the seafood, pack style, jar size, pressure and processing time for each batch. A log lets you repeat a safe batch and spot problems early. Label each jar with the contents and the date it was processed. 

## Handling and storing finished jars 

Finished jars should cool undisturbed on a towel, away from drafts, until they reach room temperature. Press the center of each lid; a lid that stays down and does not flex has sealed. Any jar that did not seal belongs in the refrigerator and should be used soon. 

Check sealed jars for cloudy liquid, bulging lids, leaks or off odors before you store or open them. Any of these signs means the jar is suspect and should be discarded without tasting. Never taste seafood from a jar that looks or smells wrong. 

Store sealed jars in a cool, dark, dry place and keep them away from heat and freezing. Home-canned seafood is a low-acid product, so the pressure process is what makes it shelf stable. When in doubt about a jar, throw it out. 

## Seafood Canning Questions 

### How do I prep for canning fish at home? 

Prep for canning fish begins with cleaning and cutting the fish, keeping it cold, and deciding between raw pack and hot pack. Fill the jars to the correct headspace, remove air bubbles, and wipe the rims before sealing. Process the jars in a pressure canner using a tested time and pressure for your fish and jar size. 

### Is home canning fish safe? 

[Home canning fish](/articles/pressure-canning-fish-at-home-recipes-jar-sizes-and-processing-times/) is safe only when you use a pressure canner and a tested procedure for the seafood you have. Fish is a low-acid food, so a boiling water bath cannot make it shelf stable. Follow the processing time and pressure exactly, and discard any jar with a failed seal or signs of spoilage. 

### Do I need a pressure canner for seafood? 

Yes, seafood needs a pressure canner to be safely stored at room temperature. The pressure canner raises the internal temperature high enough to destroy harmful bacteria in a low-acid food. A boiling water bath is not a substitute for canning fish or shellfish. 

### Should I use raw pack or hot pack for fish? 

Choose raw pack or hot pack based on the tested procedure for your fish, since the pack style affects processing time. Raw pack is simpler and keeps firm pieces, while hot pack gives a denser jar with less shrinkage. Do not mix the two methods in the same batch. 

### How much headspace should a seafood jar have? 

Use the headspace your canning source or jar instructions specify for the seafood and jar size. The gap between the food and the lid affects sealing and heat penetration. Remove trapped air bubbles and top up the liquid before you wipe the rim and close the jar. 

### Can I add oil or butter to canned seafood? 

Do not add oil or butter beyond what a tested recipe allows. Added fat can coat the fish and interfere with heat penetration in the jar. Plain water or the fish's own juice is the liquid a tested procedure expects.
