# Fish-Shaped Baking Pans and Molds

Learn how fish-shaped baking pans and molds work, which material suits cakes or savory mousses, and how to grease, bake, unmold and clean them.

A fish-shaped baking pan is a novelty mold that gives cakes or savory dishes a fish form. Cast aluminum, nonstick steel, silicone and copper versions exist, with each material releasing food differently. Clean release depends on greasing every crevice, baking the thickest part through and cooling before unmolding. 

- Brush softened butter into every scale and fin, then dust the pan with flour.
- Set a silicone fish mold on a baking sheet before filling, because silicone bends under weight.
- Check doneness with a skewer at the thickest part of the fish, near the head.
- Cool the pan briefly on a wire rack, then invert it onto a platter.
- Use decorative copper molds for food only if the maker labels them as food safe.
 

## What a fish-shaped baking pan is 

A fish-shaped baking pan is a single cavity or multi-cavity mold cast in the outline of a fish. Large pans make one centerpiece cake or loaf, while small cavities make individual portions. The inside surface carries the detail, such as scales, fins, a tail and an eye. 

Bakers call these pieces novelty baking pans because the shape matters as much as the recipe. Cooks also use fish molds without an oven, for chilled mousses, gelatin salads and aspics. An aspic is a savory dish set in clear gelled stock. 

A taiyaki pan is a hinged iron or aluminum mold for fish-shaped filled cakes from Japan. The cook fills both halves with batter, adds sweet bean paste and closes the pan. Unlike an oven pan, a taiyaki mold cooks over a burner and gets flipped during cooking. 

## How pan materials compare for release and heat 

Cast aluminum fish pans heat evenly, which helps a thick cake bake through without scorching. Heavy casting also holds crisp detail in the scales, fins and tail. Many cast pans carry a nonstick coating, yet the crevices still need grease. 

Pressed steel pans with a nonstick coating are lighter and brown the outer crust faster. Dark nonstick bakeware absorbs more oven heat, so some bakers lower the temperature slightly. Follow the pan maker's directions on any temperature change for dark coatings. 

Silicone fish molds flex, so you can peel the mold away from a delicate cake or mousse. Silicone browns less than metal, giving a paler, softer crust. A filled silicone mold must sit on a rigid baking sheet to stay level in the oven. 
| Material | Heat and browning | Release | Care | 
| Cast aluminum | Even heat, golden crust | Good with grease and flour | Hand wash, dry fully | 
| Nonstick-coated steel | Fast browning on dark coatings | Easy, but crevices still need grease | Soft sponge, no metal tools | 
| Silicone | Pale, soft crust | Peels away from delicate food | Support on a baking sheet | 
| Cast iron (taiyaki) | Holds heat on a burner | Improves with seasoning | Dry and oil after washing | 
| Copper (decorative) | Used for chilled dishes | Oil lightly, dip in warm water to unmold | Food use only if labeled food safe |  

## Sweet and savory dishes for a fish mold 

A fish-shaped cake pan suits pound cake, sponge cake and other batters with a firm crumb. Dense batters fill the scales cleanly and hold the outline after unmolding. Very light chiffon or angel food batters tend to tear in detailed crevices. 

Savory bakes such as cornbread, quick bread and seafood loaves also take the fish form well. A [baked salmon](/articles/oven-baked-salmon-recipes-the-essential-guide/) or crab loaf, bound with egg and crumbs, unmolds into a striking main course. Small cavities in a shaped [fish cake pan](/articles/fish-cake-pans-and-molds-for-shaping-fish-cakes/) can bake individual savory fish cakes. 

Chilled fish molds hold salmon mousse, smoked fish pate or a seafood aspic set with gelatin. A light film of neutral oil helps the set mixture slide out. Keep any mold holding fish or dairy in the refrigerator until serving. 

## Choosing size, depth and detail 

The capacity of a fish pan decides how much batter or mixture a recipe needs. Fill the empty pan with water from a measuring cup to find its volume. Compare that volume with the batter yield of your recipe, then scale the recipe up or down. 

A fish pan filled too high overflows, while one filled too low leaves a flat fish. Many cake recipes suggest filling a shaped pan partway, leaving room for the batter to rise. Your pan's instructions may give a fill line or a batter amount. 

Deeply carved scales look dramatic but trap more batter, which makes greasing and unmolding harder. Shallow, rounded detail releases more easily and suits beginners or delicate batters. Before buying, check that the pan fits your oven and your serving platter. 

## Preparing a fish mold for clean release 

Preparing a fish mold for release starts with fat in every crevice, not just the flat areas. A pastry brush pushes softened butter or shortening into the scales, fins and eye. Melted butter tends to pool at the bottom, leaving the raised detail bare. 

A dusting of flour over the fat forms a dry barrier between batter and metal. Tap the pan upside down to knock out loose flour, which can leave pale patches. For chocolate cake, cocoa powder replaces flour and keeps the surface dark. 

Baking spray that contains flour coats detailed pans quickly and evenly. Spray at an angle so the mist reaches the sides of every scale. Wipe off any pooled spray with a paper towel before adding batter. 

- Brush softened butter or shortening into every scale and fin
- Dust with flour, or cocoa for chocolate batter
- Tap out the excess flour over the sink
- Fill to the level your recipe or pan maker suggests
- Tap the filled pan on the counter to release air bubbles
- Smooth the top, which becomes the flat base of the fish
 

## Baking, cooling and unmolding the fish 

Baking time in a fish pan differs from a round pan, since thickness varies along the body. Start checking a little before the recipe time, then judge by the cake itself. A skewer pushed into the thickest part should come out clean or with dry crumbs. 

Cooling the fish pan on a wire rack lets steam escape and firms the cake before unmolding. A cake turned out too hot can tear at the fins and tail. A cake left in the pan until fully cold may stick as the fat sets. 

To unmold a fish cake, run a thin plastic spatula around the outer edge first. Place a rack or platter over the pan, flip both together, then lift the pan straight up. Use oven mitts, since a cast pan holds heat after leaving the oven. For chilled molds, a brief dip in warm water loosens the edges of the set mixture. 

## Cleaning and caring for fish-shaped bakeware 

Nonstick fish pans are gentlest to clean by hand in warm, soapy water. A soft brush lifts baked crumbs from the scales without scratching the coating. Knives, metal spatulas and scouring pads can scratch a nonstick coating inside the mold. 

Stuck batter in deep crevices softens after a soak in warm water. Uncoated cast aluminum can darken in a dishwasher, so check the care label first. Dry every pan fully, upside down, before storing it with other bakeware. 

Cast iron taiyaki pans need drying over low heat and a thin coat of oil after washing. Decorative copper fish molds sold for wall display may not be lined for food contact. Unlined copper can react with acidic foods, so use such a mold only as decoration. 

## Decorating and serving a fish on the table 

A fish-shaped cake becomes a centerpiece once icing picks out the scales, eye and fins. Overlapping sliced almonds or fruit can stand in for scales on a plain cake. Thin, light glazes keep the molded detail visible instead of hiding it. 

A salmon mousse fish looks finished with cucumber slices laid as scales and an olive for the eye. Dill sprigs, lemon wedges and crisp crackers frame the fish on the platter. Unmold a chilled savory fish close to serving time to keep its surface moist. 

A fish-shaped dish fits a seafood menu as an opening course or a dessert that echoes the theme. A molded salmon mousse can open a meal built around grilled shrimp or baked white fish. Slice the fish across the body so every guest gets part of the decorated surface. 

## Questions about fish-shaped pans and molds 

### Can you bake a cake in a fish-shaped pan using a regular recipe? 

Yes, a fish-shaped pan works with a regular cake recipe scaled to the pan's volume. Adjust the baking time by testing the thickest part rather than trusting the clock. 

### Why does my cake stick in a fish mold? 

A cake sticks in a fish mold when grease misses the deep crevices of the design. Turning the cake out too hot or too cold also causes tearing. A worn nonstick coating can make release harder, even with careful greasing. 

### Do silicone fish molds need greasing? 

A light coat of grease helps silicone fish molds release detailed shapes, even though silicone resists sticking. Fine scales can still hold onto sugary batter if left bare. Check the maker's directions, since some silicone molds are sold for use without grease. 

### Can you put a fish-shaped pan in the dishwasher? 

A fish-shaped pan goes in the dishwasher only if its care label allows it. Dishwasher detergent can darken uncoated cast aluminum and wear down some nonstick coatings. Many silicone molds are labeled dishwasher safe, though deep crevices may still need a brush. 

### Can I make taiyaki in an oven fish pan? 

No, an oven fish pan does not make true taiyaki, which needs a hinged mold over a burner. Taiyaki cooks on both sides with a filling sealed between two layers of batter. An oven pan can still bake a filled fish cake, though its texture differs.
